LinkLube Dry is a readily biodegradable, wax-based chain lube for use in desert dry and dusty, to mildly moist conditions. Our unique formula uses a blend of waxes suspended in a water-based emulsion to give you a long-lasting, clean-running, quiet chain.

• Wax based formulation lasts longer in dry, dusty conditions as it does not attract dirt
• Blue indicator dye easily shows when lube is dry and ready to ride
• Readily biodegradable
• Up to ~300km / 190miles per application (depending on conditions)
• Rounded tip to the applicator cap rolls easily over the chain when applying
• Unique tall and slim bottle is shaped to fit like a pen in your hand to make application easy

ECO PACKAGING

All our cardboard is uncoated (no glossy polymer coatings here) and made from a minimum of 70% recycled material. Some virgin material is always required to give the papers the strength. Our packaging company is FSC certified which means all the virgin materials are sourced from sustainable and managed forests. We use single black print to make recycling as easy as possible once disposed of.

TECHNICAL PRODUCT INFORMATION

LOAMFOAM BIODEGRADABLE BIKE CLEANER

Warning: Causes serious eye irritation.

HOW TO USE

LOAMFOAM BIODEGRADABLE BIKE CLEANER

1. Simply apply Peaty's LoamFoam liberally to dirty surfaces.
2. Wait for 3 - 5 minutes and blast off with clean water.
3. Stubborn dried-on dirt may need to be persuaded with a soft bristled brush.
4. Rinse off with cold water.

FOAMING DRIVETRAIN DEGREASER

1. Apply liberally to the cassette while cycling the chain backwards, building up a thick layer of foam
2. Apply directly to any other areas not already coated such as crank arms, derailleur bodies or jockey wheels
3. If you have a bike stand, run through all of your gears several times to agitate the grime
4. Agitate any stubborn areas where needed with a brush then leave to soak for two minutes
5. Rinse off thoroughly with clean water
6. Dry the chain using a clean cloth
7. Apply Peaty's LinkLube Dry

LINKLUBE DRY CHAIN LUBE

When applied for the first time, it is essential that LinkLube Dry is applied to a well degreased and dry drivetrain.
If a chain is dirty, then dirt and old lube take up space in the rollers, preventing new lube from reaching the places it needs to, and any residual oil-based lube can also result in reduced durability and premature blackening.

1. Fully degrease before applying fresh lube to ensure there is no old chain oil present. For best results use our Foaming Drivetrain Degreaser or, in the case of brand new chains, use XXX Solvent Degreaser to remove stubborn factory greases.
2. Ensure you thoroughly rinse your chain with clean water after degreasing (degreaser is designed to eat chain lube after all).
3. Allow chain to dry thoroughly before application.
4. Apply to the inside face of the chain only. The light blue color of the chain lube allows you to see exactly where you have and haven't applied.
5. Keep the chain cycling for 20 seconds to help the lube penetrate fully into the pins and rollers.
6. Check for over-application. You can tell if you over-apply LinkLube Dry because you’ll see the lube start to fill the narrow chain links. If this happens, just slowly cycle through your gears a few times to transfer the excess lube onto the cassette. You’ll see the lube disappear from the narrow links, leaving lube only where it’s needed on the chain.
7. Leave to fully dry so the lube goes from a light blue color to completely clear (you’re waiting for the water to evaporate, so leaving it in the sun helps). How long it takes for the water to evaporate—and for the lube to turn clear in color—depends on the weather conditions. This can range from just a few minutes (if hot) to a few hours (if cold and damp). For best results, apply the night before.
8. Ride!
   
   

CAUTION

Do not get LinkLube (or any lube for that matter!) on your brakes or brake pads.